Country Manor Shake Specifications
Country Manor Shake is a heavily formed aluminum roofing system designed to capture the beauty of hand-split cedar shakes. Its tough aluminum alloy, quality hI-R reflective finish, and fully interlocking design withstand snow, rain, and even winds of up to 120 mph. The integral airspace between the metal and the roof deck creates a thermal break to increase building energy performance.
Pre-Formed Flashings and Accessories:
- Hip and ridge caps
- Self-cleaning valley
- Starter strip and drip edge
- Gable edge trim and gable caps
- Sidewall flashing
- Vent pipe flashing
- Matching coil stock
- Color-matched butyl sealant
- RoofAquaGuard underlayment
- Aluminum screw shank nails
- Optional snow guards
- Available foam inserts for high traffic areas
Panel Measurements: 48″ x 12″; 25 panels per 100 square feet;
Weight: 46 pounds per square
Each Country Manor Shake panel is formed with the look of eight individual and deeply-grained simulated shakes of varying height, width, and thickness to duplicate the random three-dimensional appearance of real cedar shakes. The product’s low weight allows installation over many existing roofs.
Aluminum: .019” thick roofing panels; Matching accessories are .019” or .024” thick aluminum
All aluminum panels and accessories are made of 3105-H25 aluminum sheet (minimum tensile strength 26,000 psi; minimum yield strength 22,000 psi) or equivalent. The aluminum has minimum 95% recycled content.
Minimum Roof Pitch: 4:12 in snow areas, or 3:12 in standard conditions.
Finish: Industry-leading PVDF coating technology
Country Manor Shake panels and factory-formed accessories are protected with a two-coat, high performance Kynar 500® or Hylar 5000® PVDF resin-based finishes, which includes a protective primer and baked-on high-performance topcoat to resist chalking, fading, and deterioration. The finish includes reflective pigment to enhance the product’s energy efficiency.
Country Manor Shake is a Metal Construction Association Certified Metal Roofing Product.
For more information or architectural specifications, contact us.
Kynar 500® is a registered trademark belonging to Arkema Inc.
Hylar 5000® is a registered trademark belonging to Solvay